Free for cellphones 6500
№1 in Kazakhstan! *
Filler coats
Tile adhesives
Grouts for tile seams
Mixes for gypsum boards
Self-leveling floors
Waterproofing mixes
Hello, I am Modulor!
I'm a model of ideal proportions in architecture and construction.
I will give you recommendations on working with AlinEX products
Self leveling floors

Keep proper proportion of water and dry mix when making your mortar

Finishing refinement

I would recommend AlinEX FINISH P for finishing refinement, as it is the best flexible filler coat, and it provides perfect result!

Wall Finishing

It is better to use AlinEX GLATT for wall finishing as  it takes twice less time to apply.


Gypsum plaster

AlinEX GRENDER is best for leveling of walls; it is easily applied and very economical!

Tile adhesive

Do not glue the tiles on the dried up adhesive operate in small areas

Filler coats for further wallpapering

We would recommend using filler coats based on a gypsum adhesive, such as GLATT or GLATT PLUS for further wallpapering


SET 300 and 301

When attaching standard tiles of 200*300 mm, the coat of SET 300SET 301 can be between 3 and 7 mm thick 

FLASH more than 20 colors

Wide selection of grouts FLASH more than 20 colors gives a possibility to select the right grout tone to match the specific tiles.

Grouting of gypsum boards
We recommend to apply a second layer of grout JOINT after drying the first layer 8 hours
Floor Leveling

We would recommend LEVEL 1  for floor leveling in dry premises.


We would recommend PRIMERto improve adhesion of plasters, filler coats, and tile adhesives with bases.

Self leveling floor with a complex adhesive Unilevels 25 kg.

Наливной пол на комплексном связующем Unilevel 25 кг.

Intended for creation and leveling of floor bases when constructing and renovating residential buildings and public areas.


volume: 25 кг.
  • Description
  • Manual
  • Technical specification
  • Калькулятор

Area of application

Intended for creation and leveling of floor bases when constructing and renovating residential buildings and public areas. For manual and mechanical application. For indoor use in dry premises.

Transportation and storage

Paper bags of 25 kg. Paper bags of 10 kg. Keep away from humidity. Use open bags first. The guaranteed storage life in a factory package in a dry room is at least 12 months. Store at a temperature between -30 ˚С and +40˚С and relative humidity of 80%.


People who viewed this product also bought:
  • Грунтовка "PRIMER 2" 5 кг.


    Primer for improvement and controlling of absorption capacity of bases, floors.

Recently searched: