Hotline
Free for cellphones 6500
№1 in Kazakhstan! *
Plasters
Filler coats
Tile adhesives
Grouts for tile seams
Mixes for gypsum boards
Self-leveling floors
Waterproofing mixes
Primers
Hello, I am Modulor!
I'm a model of ideal proportions in architecture and construction.
I will give you recommendations on working with AlinEX products
Self leveling floors

Keep proper proportion of water and dry mix when making your mortar

Finishing refinement

I would recommend AlinEX FINISH P for finishing refinement, as it is the best flexible filler coat, and it provides perfect result!

Wall Finishing

It is better to use AlinEX GLATT for wall finishing as  it takes twice less time to apply.

 

Gypsum plaster

AlinEX GRENDER is best for leveling of walls; it is easily applied and very economical!

Tile adhesive

Do not glue the tiles on the dried up adhesive operate in small areas

Filler coats for further wallpapering

We would recommend using filler coats based on a gypsum adhesive, such as GLATT or GLATT PLUS for further wallpapering

 

SET 300 and 301

When attaching standard tiles of 200*300 mm, the coat of SET 300SET 301 can be between 3 and 7 mm thick 

FLASH more than 20 colors

Wide selection of grouts FLASH more than 20 colors gives a possibility to select the right grout tone to match the specific tiles.

Grouting of gypsum boards
We recommend to apply a second layer of grout JOINT after drying the first layer 8 hours
Floor Leveling

We would recommend LEVEL 1  for floor leveling in dry premises.

Primers

We would recommend PRIMERto improve adhesion of plasters, filler coats, and tile adhesives with bases.

HomeCatalogue

Self-leveling floors


Self-leveling floors is a type of covering with the use of self-leveling mixes.


The specific feature of self-leveling floors is the minimal possible coat thickness of 3.5 mm.

Self-leveling floors are for initial and final leveling of concrete and cement-sand floor bases.

There are two types of self-leveling floors: based… Read more


Наливной пол на комплексном связующем Unilevel 25 кг.

Intended for creation and leveling of floor bases when constructing and renovating residential buildings and public areas.

 

Наливной пол цементный "LEVEL 1" 25 кг.

For initial leveling of concrete and cement-sand floor bases using the “screeds” inside the buildings: in residential and public areas.

Наливной пол цементный "LEVEL 2" 25 кг.

 

For final leveling of concrete and cement-sand floor bases inside the buildings: in residential and public areas.

Наливной пол цементный "LEVEL 3" 25 кг.

For leveling of floors in industrial premises subject to heavy loads.