Hotline
Free for cellphones 6500
№1 in Kazakhstan! *
Plasters
Filler coats
Tile adhesives
Grouts for tile seams
Mixes for gypsum boards
Self-leveling floors
Waterproofing mixes
Primers
Hello, I am Modulor!
I'm a model of ideal proportions in architecture and construction.
I will give you recommendations on working with AlinEX products
Self leveling floors

Keep proper proportion of water and dry mix when making your mortar

Finishing refinement

I would recommend AlinEX FINISH P for finishing refinement, as it is the best flexible filler coat, and it provides perfect result!

Wall Finishing

It is better to use AlinEX GLATT for wall finishing as  it takes twice less time to apply.

 

Gypsum plaster

AlinEX GRENDER is best for leveling of walls; it is easily applied and very economical!

Tile adhesive

Do not glue the tiles on the dried up adhesive operate in small areas

Filler coats for further wallpapering

We would recommend using filler coats based on a gypsum adhesive, such as GLATT or GLATT PLUS for further wallpapering

 

SET 300 and 301

When attaching standard tiles of 200*300 mm, the coat of SET 300SET 301 can be between 3 and 7 mm thick 

FLASH more than 20 colors

Wide selection of grouts FLASH more than 20 colors gives a possibility to select the right grout tone to match the specific tiles.

Grouting of gypsum boards
We recommend to apply a second layer of grout JOINT after drying the first layer 8 hours
Floor Leveling

We would recommend LEVEL 1  for floor leveling in dry premises.

Primers

We would recommend PRIMERto improve adhesion of plasters, filler coats, and tile adhesives with bases.

HomeCataloguePrimers

PRIMER 10 kg.

Грунтовка "PRIMER" 10 кг.

For strengthening of porous and highly-absorbent surfaces, controlling absorption capacity of concrete, gas-concrete, and plastered bases, cement and gypsum plates, plaster boards.

 



volume: 10 кг.
Share:
  • Description
  • Manual
  • Калькулятор
 

Areaofapplication

Intended for strengthening of porous and highly-absorbent surfaces, controlling absorption capacity of concrete, gas-concrete, and plastered bases, cement and gypsum plates, plaster boards. It improves adhesion properties of plasters, filler coats, tile adhesives to bases.

Packaging and storage 
Keep container closed, in a dark room at a temperature between +5°С and +30°С out of the reach of children. It doesnotchangeitspropertiesafterthe packaging is open. Drycanscanbedisposedwithhouseholdwaste. The primer has to be transported at specified temperatures. Guaranteed storage life in a factory package is 6 months. 

People who viewed this product also bought:
Recently searched:
  • Грунтовка "PRIMER" 10 кг.

    For strengthening of porous and highly-absorbent surfaces, controlling absorption capacity of concrete, gas-concrete, and plastered bases, cement and gypsum plates, plaster boards.